Howie

Forum Replies Created

Viewing 15 posts - 31 through 45 (of 251 total)
  • Author
    Posts
  • in reply to: Gasification powered pickup? #59649
    Howie
    Participant

    :)If you are using wood for heat you should think about a gasification furnace.
    They use half as much wood and you don’t have to clean the chimney.:)

    in reply to: Back from Tunbridge #62685
    Howie
    Participant

    We’re back home in PA and really enjoyed a fantastic outing.
    We met so many of our old friends and made some new ones.
    We want to thank Carl and Lisa for the tremendous amount of work that
    they put out for this. Unbelievable what they have done with this!
    There was so much to learn from so many knowledgeable people, good conversations, great food and plenty of it.
    Just wish Carl could get friendlier with the weatherman so we could have nicer weather.
    Thanks again Carl and Lisa and all your helpers for putting so much of yourselves into this.
    Howie and Betty

    in reply to: bought a yoke #62641
    Howie
    Participant

    I THINK I have finally figured it out. It is a nice looking yoke but unuseable.It was made to use the middle and outside holes for the bow holes.Then they drilled the wider holes. Now the neck seat is off center. It is a nice wall hanger.:):)

    in reply to: Single horse plow wanted #62421
    Howie
    Participant

    Hey Andy look me up at Tunbridge I most likely have what you want.

    Howie

    in reply to: what breed do you prefer to work with? #59909
    Howie
    Participant

    Joshua
    The long leg Dexter is not to far behind the Devon as being quik to learn, He is faster to learn than than the Holstien.

    in reply to: what breed do you prefer to work with? #59908
    Howie
    Participant

    The Devon of which we speak are from the Ruby Red or North Devon 400 years ago.
    They are not high strung, just super smart. If he can see you or hear you, you are training him. Many people inadvertnly train him to do things they don’t want.
    You can train a Devon in a fraction of the time it would take to train a Swiss.:)
    The Devon has 400 years of oxen bred into him. He is very people oriented.

    P.S. The Swiss make great oxen.

    in reply to: what breed do you prefer to work with? #59907
    Howie
    Participant

    Now Vicki knows where her steers got their smarts.:o:(;)

    in reply to: what breed do you prefer to work with? #59906
    Howie
    Participant

    I have been told that the Dexter was developed from the Kerry and Devon. If you were to breed your Dexter cows with a Milking Devon bull you should get a small super smart animal.:)

    in reply to: Mid Coast Maine #59819
    Howie
    Participant

    oxnun
    Tell us about your trip to the plowfest yesterday.:)

    in reply to: wanted 6, 7, or 8 inch used yoke #59111
    Howie
    Participant

    I most likely have what you want.:)

    in reply to: Cutting Firewood #59084
    Howie
    Participant

    I wish I had that in my back yard. It would heat my house for a few years.:):)

    in reply to: Question to all bow makers #47299
    Howie
    Participant

    Fabian
    I have never had good luck with Ash but have done a lot of Hichory. If you cut it and do not let it dry, You can split and bend it with the bark on. If you let it dry some you will have to steam it. If you leave it in the steam to long the bark will pop of.:confused:

    in reply to: Question to all bow makers #47298
    Howie
    Participant

    The bark replaces the iron band,BUT, although it helps a great deal it is far from 100%. It helps a lot more if you are bending them green rather than with steam.:confused:

    in reply to: Round bale mover #58796
    Howie
    Participant

    Tim
    My little Devon cows couldn’t put the big bales up in the feeder with their horns, so we used their britchens.:(
    Pat and Willie have no problem.:)

    in reply to: bow problems ? need your advice #58419
    Howie
    Participant

    The bow is not to high, if anything it is a litttle low.;)

Viewing 15 posts - 31 through 45 (of 251 total)